Application of the Algoclear Cleaning Process biocide

The Algoclear Cleaning Process aims at using just enough biocide to kill the biofilm factored by site conditions.

The amount of ACP biocide will vary with the amount of live organisms to kill. It is therefore sensible to remove moss and loose material before application. A fan jet will foam the mix on impact and give a good visual reference for an even application.

The amount of active ingredient in dry form per m² is the real measure of treatment potency. The dosage can be applied with a weak mix, applied liberally, or a strong one, applied thinly. When the water evaporates the surface concentration will increase in the same proportion.

Area per litre of ACP biocide concentrate Ground / sports / play surfaces Artificial grass Concrete & silicone render Timber Glass / GRP & Metals
Biological load Average

Low

1 to 40: first pass Saturation Saturation Low
Dilution rate 1 to 40

1 to 50

1 to 60: follow up 1 to 20 1 to 20 1 to 40
Diluted quantity/litre of concentrate 40 litres

50 litres

40 to 60 litres 20 20 40
Guide application rate of the mix on textured/porous surfaces 4 to 5m2/litre = 160 to 200m2

4 to 5m2/litre = 200 to 250m2

4 m2/litre
= 160 to 200m2
Porous 2 m2/litre = 40m2 3 m2/litre = 60m2
Area for 5 litres of ACP biocide concentrate 800 to 1000 m2
1000 to 1250 m2
800 to 1200 m2 200 m2 300 m2
Guide application rate of the mix on smooth or non-absorbent surfaces 6 m2/litre = = 240m2/

6 m2/litre = 300m2/

Painted or acrylic render 3 m2/litre
= 60m2
8 m2/litre = 320m2
Area for 5 litres of ACP biocide concentrate 1200 m2

1500 m2

300 m2 1600 m2
Area per litre of ACP biocide concentrate Concrete tiles Clay tiles Natural slates Thatch Cementitious agricultural sheeting
Dilution rate 1 to 20 1 to 20 1 to 20 1 to 30 1 to 20
Visual guide Saturation Saturation No excessive dribbling at eaves Saturation
Guide application rate of the mix 0.8 litre/m2 = 1.2 m2/litre 0.5 litre/m2 = 2 m2/litre 0.33 litre/m2 = 3 m2/litre 2 litre/m2 = 0.5 m2/litre 0.66 litre/m2 = 1.5 m2/litre
Area for 5 litres of ACP biocide concentrate 120 m2 200 m2 300 m2 75 m2 150 m2

Safety on site: Children and domestic animals are kept out of wet areas. Do not leave small ponding areas flooded with a dilute to dry up : Brush the excess liquid away and let dry.

For use on…

Cleaning of Artificial sports and large surfaces using ACP biocide

Artificial sports and large surfaces

Building Cleaning

Buildings

Pathways, resin bound rubber or aggregates & brick paving

Pathways, resin bound rubber or aggregates & brick paving

Cleaning of Stone Paved Areas using ACP biocide - OleoClear

Stone paved areas

Painted Surface

Painted surfaces and glass

Decking

Timber structures & decking

The Algoclear Cleaning Process applied to white render

The Algoclear Cleaning Process applied to white render

The Algoclear Cleaning Process applied to roof cleaning

The Algoclear Cleaning Process applied to roof cleaning